Clearing The Zone Server Database; Verifying The Zone Configuration - Cisco Nexus 5500 Series NX-OS Configuration Manual

Configuring and Managing Zones
Step 3
Step 4
Step 5
Step 6

Clearing the Zone Server Database

You can clear all configured information in the zone server database for the specified VSAN.
To clear the zone server database, use the following command:
switch# clear zone database vsan 2
After entering a clear zone database command, you must explicitly enter the copy running-config
Note
startup-config to ensure that the running configuration is used when the switch reboots.
Clearing a zone set only erases the full zone database, not the active zone database.
Note

Verifying the Zone Configuration

You can view any zone information by using the show command. If you request information for a specific
object (for example, a specific zone, zone set, VSAN, or alias, or keywords such as brief or active), only
information for the specified object is displayed.
OL-30895-01
Command or Action
zone clone oldname newname vsan number
Example:
switch(config)# zone clone test myzone3 vsan
3
fcalias clone oldname newname vsan vsan-id
Example:
switch(config)# fcalias clone test myfcalias
vsan 30
zone-attribute-group clone oldname newname vsan
vsan-id
Example:
switch(config)# zone-attribute-group clone test
mygroup2 vsan 10
zoneset activate name newname vsan vsan-id
Example:
switch(config)# zoneset activate name
myzonetest1 vsan 3
Cisco Nexus 5500 Series NX-OS SAN Switching Configuration Guide, Release 7.x
Verifying the Zone Configuration
Purpose
Clones a zone in the specified VSAN.
Clones a fcalias in the specified
VSAN.
Clones a zone attribute group in the
specified VSAN.
Activates the zone set and updates the
new zone name in the active zone set.
145