Resetting Fspf To The Default Configuration; Enabling Or Disabling Fspf - Cisco Nexus 5500 Series NX-OS Configuration Manual

Configuring Fibre Channel Routing Services and Protocols
Step 2
Step 3
Step 4
Step 5

Resetting FSPF to the Default Configuration

You can return the FSPF VSAN global configuration to its factory default.
Procedure
Step 1
Step 2

Enabling or Disabling FSPF

You can enable or disable FSPF routing protocols.
OL-30895-01
Command or Action
fspf config vsan vsan-id
Example:
switch(config)# fspf config vsan
14
spf static
Example:
switch-config-(fspf-config)# spf
static
spf hold-time value
Example:
switch-config-(fspf-config)# spf
hold-time 10
region region-id
Example:
switch-config-(fspf-config)#
region 1
Command or Action
configure terminal
Example:
switch# configure terminal
switch(config)#
no fspf config vsan vsan-id
Example:
switch(config)# no fspf config vsan 24
Cisco Nexus 5500 Series NX-OS SAN Switching Configuration Guide, Release 7.x
FSPF Global Configuration
Purpose
Enters FSPF global configuration mode for the
specified VSAN.
User needs to configure the VSAN on which
Note
FSPF is being configured.
Forces static SPF computation for the dynamic (default)
incremental VSAN.
Configures the hold time between two route
computations in milliseconds (msec) for the entire
VSAN. The default value is 0.
Note If the specified time is shorter, the routing is
faster. However, the processor consumption
increases accordingly.
Configures the autonomous region for this VSAN and
specifies the region ID.
Purpose
Enters global configuration mode.
Deletes the FSPF configuration for the
specified VSAN.
171