Database Reactivation - Cisco Nexus 5500 Series NX-OS Configuration Manual

Configuring Port Security
Step 2

Database Reactivation

You can reactivate the port security database.
Procedure
Step 1
Step 2
Step 3
Step 4
Step 5
Step 6
OL-30895-01
Command or Action
port-security activate vsan vsan-id force
Example:
switch(config)# port-security activate vsan
210 force
Command or Action
configure terminal
Example:
switch# configure terminal
switch(config)#
no no port-security auto-learn vsan vsan-id
Example:
switch(config)# no no port-security
auto-learn vsan 35
exit
Example:
switch(config)# exit
port-security database copy vsan vsan-id
Example:
switch# port-security database copy vsan
35
configure terminal
Example:
switch# configure terminal
switch(config)#
port-security activate vsan vsan-id
Example:
switch(config)# port-security activate
vsan 35
Cisco Nexus 5500 Series NX-OS SAN Switching Configuration Guide, Release 7.x
Port Security Activation
Purpose
Forces the port security database to activate
for the specified VSAN even if conflicts
occur.
Purpose
Enters global configuration mode.
Disables auto-learning and stops the switch
from learning about new devices that access
the switch. This command also enforces the
database contents based on the devices learned
up to this point.
Exits the configuration mode.
Copies from the active to the configured
database.
Reenters configuration mode.
Activates the port security database for the
specified VSAN, and automatically enables
auto-learning.
251