Cisco Nexus 5500 Series NX-OS Configuration Manual page 284

Port Security Configuration Distribution
Table 36: Scenarios for Activation and Auto-Learning Configurations in Distributed Mode
Scenario
A and B exist in the
configuration database,
activation is not done and
devices C and D are
logged in.
A and B exist in the
configuration database,
activation is not done, and
devices C and D are
logged in.
Cisco Nexus 5500 Series NX-OS SAN Switching Configuration Guide, Release 7.x
260
Actions Distribution = OFF
1. You activate the port configuration database =
security database and {A,B}
enable auto-learning.
active database = {A,B,
C
2. A new entry E is added configuration database =
to the configuration {A,B, E}
database.
active database = {A,B,
C*, D*}
3. You issue a commit. Not applicable
1. You activate the port configuration database =
security database and {A,B}
enable auto-learning.
active database = {A,B,
C*, D*}
2. You disable learning. configuration database =
{A,B}
active database = {A,B,
C, D}
3. You issue a commit. Not applicable
Configuring Port Security
Distribution = ON
configuration database =
{A,B}
active database = {null}
1
, D*}
pending database = {A,B
+ activation to be
enabled}
configuration database =
{A,B}
active database = {null}
pending database = {A,B,
E + activation to be
enabled}
configuration database =
{A,B, E}
active database = {A,B,
E, C*, D*}
pending database = empty
configuration database =
{A,B}
active database = {null}
pending database = {A,B
+ activation to be
enabled}
configuration database =
{A,B}
active database = {null}
pending database = {A,B
+ activation to be enabled
+learning to be disabled}
configuration database =
{A,B}
active database = {A,B}
and devices C and D are
logged out. This is equal
to an activation with
auto-learning disabled.
pending database = empty
OL-30895-01