Product Certifications - Emerson Rosemount 2051 Quick Start Manual

Quick Start Guide

8.0 Product Certifications

Rev 1.2
8.1 European Directive Information
A copy of the EU Declaration of Conformity can be found at the end of the Quick
Start Guide. The most recent revision of the EU Declaration of Conformity can be
found at Emerson.com/Rosemount.
8.2 Telecommunication Compliance
All wireless devices require certification to ensure they adhere to regulations
regarding the use of the RF spectrum. Nearly every country requires this type of
product certification.
Emerson is working with governmental agencies around the world to supply fully
compliant products and remove the risk of violating country directives or laws
governing wireless device usage.
8.3 FCC and IC
This device complies with Part 15 of the FCC Rules. Operation is subject to the
following conditions: This device may not cause harmful interference. This device
must accept any interference received, including interference that may cause
undesired operation. This device must be installed to ensure a minimum antenna
separation distance of 20 cm from all persons.
8.4 Ordinary Location Certification
As standard, the transmitter has been examined and tested to determine that the
design meets the basic electrical, mechanical, and fire protection requirements
by a nationally recognized test laboratory (NRTL) as accredited by the Federal
Occupational Safety and Health Administration (OSHA).
8.5 Installing in North America
The US National Electrical Code
permit the use of Division marked equipment in Zones and Zone marked
equipment in Divisions. The markings must be suitable for the area classification,
gas, and temperature class. This information is clearly defined in the respective
codes.
USA
I5 U.S.A. Intrinsically Safe (IS)
Certificate: FM 3046325
Standards: FM Class 3600 - 2011, FM Class 3610 - 2010, FM Class 3810 - 2005,
Markings: IS CL I, DIV 1, GP A, B, C, D T4; CL 1, Zone 0 AEx ia IIC T4;
14
®
ANSI/ISA 60079-0 - 2009, ANSI/ISA 60079-11 - 2009, NEMA
ANSI/IEC 60529
T4 (–40 °C ≤ T ≤ +70 °C); when installed per Rosemount drawing
a
03031-1062; Type 4X/IP66/IP68
(NEC) and the Canadian Electrical Code (CEC)
May 2017
®
250 - 2003,