Emerson Rosemount 2051 Quick Start Manual page 15

May 2017
Special Conditions for Safe Use (X):
1. The Rosemount 2051 Wireless Pressure Transmitter shall only be used with the
701PGNKF Rosemount SmartPower
2. The in-line pressure sensor may contain more than 10% aluminum and is considered a
potential risk of ignition by impact or friction. Care must be taken into account during
installation and used to prevent impact and friction.
3. The surface resistivity of the transmitter housing is greater than 1 GΩ. To avoid
electrostatic charge build-up, it must not be rubbed or cleaned with solvents or a dry
cloth.
Canada
I6 Canada Intrinsically Safe
Certificate: CSA 2526009
Standards: CAN/CSA C22.2 No. 0-M91, CAN/CSA C22.2 No. 94-M91,
Markings: Intrinsically Safe for Class I, Division 1, Groups A, B, C, D, T4
Europe
I1 ATEX Intrinsic Safety
Certificate: Baseefa12ATEX0228X
Standards: EN 60079-0:2012, EN 60079-11:2012
Markings:
Special Conditions for Safe Use (X):
1. The plastic enclosure may constitute a potential electrostatic ignition risk and must not
be rubbed or cleaned with a dry cloth.
2. The Model 701PGNKF Power Module may be replaced in a hazardous area. The power
module has a surface resistivity greater than 1 GΩ and must be properly installed in the
wireless device enclosure. Care must be taken during transportation to and from the
point of installation to prevent electrostatic charge build-up.
International
I7 IECEx Intrinsic Safety
Certificate: IECEx BAS 12.0124X
Standards: IEC 60079-0:2011, IEC 60079-11:2011
Markings: Ex ia IIC T4 Ga, T4(–40 °C ≤ T
Special Conditions for Safe Use (X):
1. The plastic enclosure may constitute a potential electrostatic ignition risk and must not
be rubbed or cleaned with a dry cloth.
2. The Model 701PGNKF Power Module may be replaced in a hazardous area. The power
module has a surface resistivity greater than 1 GΩ and must be properly installed in the
wireless device enclosure. Care must be taken during transportation to and from the
point of installation to prevent electrostatic charge build-up.
Brazil
I2 INMETRO Intrinsic Safety
Certificate: UL-BR 13.0534X
Standards: ABNT NBR IEC 60079-0:2008 + Errata 1:2011, ABNT NBR IEC 60079-11:2009
Markings: Ex ia IIC T4 IP66 Ga, T4(–40 °C ≤ T
CSA Std C22.2 No. 142-M1987, CSA Std C22.2 No. 157-92,
CSA Std C22.2 No. 60529:05
when installed per Rosemount drawing 03031-1063; Type 4X/IP66/IP68
II 1 G Ex ia IIC T4 Ga, T4(–40 °C ≤ T
™
Battery Pack.
≤ +70 °C); IP66/68
a
≤ +70 °C); IP66/68
a
≤ +70 °C)
a
Quick Start Guide
15