Product Certifications - Emerson Rosemount 3051 Quick Start Manual

Quick Start Guide
5

Product certifications

5.1 Rosemount 3051D Pressure Transmitter
Rev 3.10
5.1.1 European Directive information
A copy of the EU Declaration of Conformity can be found at the
end of the Quick Start Guide. The most recent revision of the EU
Declaration of Conformity can be found at Emerson.com.
5.1.2 Europe
E8 ATEX Flameproof and Dust
Certificate
Standards
Markings
Table 5-1: Process temperature
Temperature class
T6
T5
T4
Special Conditions for Safe Use (X):
1. This device contains a thin wall diaphragm less than 1 mm
thickness that forms a boundary between Category 1 (process
connection) and Category 2 (all other parts of the equipment).
The model code and datasheet are to be consulted for details
of the diaphragm material. Installation, maintenance and
use shall take into account the environmental conditions to
which the diaphragm will be subjected. The manufacturer's
instructions for installation and maintenance shall be followed
in detail to assure safety during its expected lifetime.
2. Flameproof joints are not intended for repair.
24
DEKRA12ATEX0212X (Ex d); Baseefa12ATEX0191 (Ex ta)
EN IEC 60079-0: 2018, EN60079-1: 2014, EN60079-26:
2015, EN60079-31: 2014
II 1/2 G Ex db IIC T6...T4 Ga/Gb, T6 (–60 °C ≤ T
°C), T5/T4 (–60 °C ≤ T
II 1 D Ex ta IIIC T
V = 42.4 Vdc
max
Process connection
temperature
–60 to +70 °C
–60 to +80 °C
–60 to +120 °C
≤ +80 °C)
a
105 °C Da (–20 °C ≤ T
200
Ambient temperature
–60 to +70 °C
–60 to +80 °C
–60 to +80 °C
August 2023
≤ +70
a
≤ +85 °C)
a
Rosemount 3051