Wireless Considerations - Emerson Rosemount 2051 Quick Start Manual

Pressure transmitter/dp flowmeters with wirelesshart protocol

Hide thumbs Also See for Rosemount 2051:

May 2017

1.0 Wireless considerations

1.1 Power up sequence

The power module should not be installed on any wireless device until the

™

Emerson

Smart Wireless Gateway (Gateway) is installed and functioning

properly. This transmitter uses the green power module (order model number

701PGNKF). Wireless devices should also be powered up in order of proximity

from the Gateway, beginning with the closest. This will result in a simpler and

faster network installation. Enable active advertising on the Gateway to ensure

new devices join the network faster. For more information, see the Emerson

Smart Wireless Gateway

1.2 Connecting the transmitter with a Field Communicator

In order for the Field Communicator to interface with the Rosemount 2051

Wireless, the power module must be connected. This transmitter uses the green

power module (order model number 701PGNKF).

the Field Communicator to the transmitter. Open the power module

compartment to hook up the leads.

Figure 1. Field Communicator Connections

Reference

Manual.

Quick Start Guide

Figure 1

shows how to connect

Table of Contents

Rosemount 2051cf