Table of Contents
Advertisement
TracVision G6 Technical Manual
If the antenna is unable to find the
selected satellite automatically, you
can manually point the antenna
using the Manual mode (see
"Manually Controlling the Antenna"
on page 81).
88
Updating Satellite Frequency Data
If you select a channel but it doesn't appear on the TV, the
satellite's frequency data may have changed. The Satellite
Frequency Scan feature allows you to update the frequency data
of any satellite stored in the system's library.
With the desired satellite, band, and polarization selected, the
system will automatically search for the frequency with the
strongest signal. The system will then update that satellite's
programmed data with the new frequency (and associated
network ID) and store it in the satellite library.
To update the satellite frequency data, follow the steps below:
1. Place your IRD in the satellite signal meter mode.
2. Select the desired satellite on the ADCU. Ensure
the TV signal meter indicates that you have a
strong signal.
3. Select the desired polarization and band on the
IRD.
4. Do not move the vessel. Your boat must remain
motionless during the entire Satellite Frequency
Scan process.
5. Follow the ADCU menus on the next page. The
scan itself will take a couple of minutes. Once
complete, restart the antenna and ensure the
antenna will track the new frequency.
If you are unsure about when and how to use the Satellite
Frequency Scan feature, please contact your dealer/installer or
distributor for assistance.
54-0161
Hide quick links:
Advertisement
Table of Contents
Troubleshooting
