Table of Contents
Advertisement
TracVision G6 Technical Manual
Figure 3-28
Manual Antenna
Control Procedure
If the manual adjustment of the
antenna reached the maximum
rotation (720°), the antenna will
rotate 360° and return to the
Manual Control Antenna screens.
If the system started up in Instant
On mode, the following message
may be displayed:
InstantOn Reboot
Please wait
YES tells the antenna to begin
actively tracking the set azimuth
and elevation. NO leaves the
antenna halted in its current
position.
82
Manually Controlling the Antenna
In certain circumstances, it may be necessary to control the
azimuth, elevation, and tracking of the TracVision G6 antenna
manually, using the process illustrated in Figure 3-30. Use + and -
keys to manually move the dish. Azimuth measurements are
reported as relative to the bearing of the vessel's bow.
Man control antenna?
Enter
Next
ALERT SCREENS
Finding limit switch
Please wait
AZ = XXX.X° EL = XX.X°
-
Azimuth
AZ = XXX.X° EL = XX.X°
-
Elevation
Make antenna track?
Yes
No
Return
Proceed to "Restarting the
Antenna"
This screen may appear under
certain conditions in antenna
software revision H or later.
+
+
Cancel
54-0161
Hide quick links:
Advertisement
Table of Contents
Troubleshooting
