KVH Industries TracVision G6 Installation & Technical Manual page 82

TracVision G6 Technical Manual
Figure 3-23
Reading Calibration Score
Figure 3-24
Clearing Compass Calibration
After resetting this autocalibration,
the following screen may appear:
System Halted
Power system Off/On
This may result from a temporary
lack of communication with the
compass. Restart the system to
restore compass data.
78
Reading the Calibration Score
These screens are only seen if heading reference is INTERNAL.
The calibration score should be checked during the installation
process and whenever adjustments are made to vessel equipment
that can affect the compass' accuracy. A complete explanation of
the compass calibration score is provided in "The Calibration
Score" on page 43.
Read Cal Score?
Yes Next
ACC MagEnv
CAL<#° XXXX
Clearing Compass Calibration
These screens are only seen if heading reference is INTERNAL.
Clearing the compass calibration will reset the system to the
factory defaults.
Clear COMPASS Cal?
Yes Next Return
ALERT SCREENS
AutoCal resetting
Please wait
AutoCal reset done
Turn system Off/On
Return
Proceed to "Clearing Compass
Calibration"
Cal#
#
Return to "Selecting
Autocompensation"
Turn off power to GyroTrac for two
seconds then turn it back on to reset.
54-0161