Warranty/Service Information; Preventive Maintenance - KVH Industries TracVision G6 Installation & Technical Manual

Hide thumbs Also See for TracVision G6:
Table of Contents

Advertisement

5.1

Warranty/Service Information

For information on KVH warranty, repair, and liability policies,
please refer to the complete warranty statement provided at the
conclusion of this manual. If you have any questions, please call
your local authorized dealer/installer or distributor, or contact
KVH or KVH Europe directly.
5.2

Preventive Maintenance

TracVision G6 requires minimal preventive maintenance. The
following tasks are sufficient to maintain peak performance.
Monthly
• Wash the exterior of the radome and baseplate
assembly with fresh water; a mild detergent may
be added to remove grime. Use caution when
spraying the radome directly with high-pressure
water.
Do not apply abrasive cleaners or volatile solvents
such as acetone to the ABS radome.
Check all connectors at the sensor module, ADCU,
antenna baseplate, and IRD. Remove connectors
and examine for signs of corrosion; clean as
needed.
Semi-Annually
Remove the radome and examine the interior of
the antenna unit for signs of corrosion, loose
connections, or frayed or broken wires.
54-0161
When cleaning the radome, avoid
any compounds that react with
plastic.
Maintenance
103

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents