Setting Display Brightness - KVH Industries TracVision G6 Installation & Technical Manual

TracVision G6 Technical Manual
Figure 3-16
Display Brightness Controls
Figure 3-17
Internal/External Reference Menus
74

Setting Display Brightness

The ADCU display's brightness may be adjusted to suit your
preferences. Press the right key to make the display brighter, the
left key to make it dimmer. When you are satisfied with the
setting, press the center key to accept the setting.
Set brightness?
Yes Next Return
Min Bright
*****************
Dim Display Brighten Display
Selecting Heading Reference Source
The Heading Reference Source menu provides the option to
override the GyroTrac's external sensor module in favor of
another source, such as a ship's gyro, as follows:
• INTERNAL – GyroTrac will receive and use
heading data from its sensor module. The Control
Compass menus will be available.
EXTERNAL
• – GyroTrac will receive and use
heading data from an external heading source. As
a result, the Control Compass menus will be
inactive and hidden. Refer to Figure 2-21 for
details on connecting a ship's gyro to the ADCU.
Set Heading int/ext?
Yes Next
Reference: Internal
Int ENTER
Proceed to "Selecting
Heading Reference
Max Source"
The ADCU display offers
20 levels of brightness,
each of which is indicated
by an asterisk that
appears or disappers
when the Dim and
Brighten keys are pressed.
Return
Proceed to "Entering
Gyro Offset Values"
Ext
Setting will blink "Internal"
or "External" based on the
current selection. Pushing
the INT or EXT buttons will
toggle between selections.
54-0161