Table of Contents
Advertisement
Stepper Interface
Dimensions
10.5" (267 mm) x 5.8" (147 mm) x 2.3" (58 mm)
Weight
13 oz (370 gm)
Input
NMEA 0183
Stepper Output
3, 6, 12, 24 steps/degree
Output Voltage
5 V standard (30-70 V option also available: Part
Number 19-0089)
Stepper Voltage Converter
A stepper voltage converter (KVH Part Number 19-0089) is
needed when the receiving stepper device employs a reference
voltage greater than the 5 volt maximum available from the
stepper interface. The converter is wired directly between the
stepper interface output and the receiving equipment to provide
the necessary reference voltage. An external 6-70 VDC power
supply is required to provide the necessary voltage to this device.
Figure F-2 on the following page shows the stepper voltage
wiring connections and wiring diagram.
54-0161
GyroTrac Data Outputs
Table F-6
Stepper Interface Specifications
145
Hide quick links:
Advertisement
Table of Contents
Troubleshooting
