KVH Industries TracVision G6 Installation & Technical Manual page 58

TracVision G6 Technical Manual
Table 2-15
Sample Satellite Configuration
Data (Europe)
54
An Example of Configuring a User-defined Satellite (Europe)
The following is an example of configuring the fictional
YOURSAT 101 as the USER1 configured satellite. Prior to
configuring this satellite or any others, be certain to get the most
up-to-date information from one of the sources previously
discussed.
Yoursat 101 at 7 West, DVB decoder, Linear Polarization LNB
Horizontal High
Frequency
Symbol Rate
FEC Code
Network ID
Vertical High
Frequency
Symbol Rate
FEC Code
Network ID
Vertical Low
No Data Listed
Horizontal Low
No Data Listed
Based on this information, the data entered via the PC would
look like this, assuming that YOURSAT 101 would be Satellite A:
SATCONFIG,USER1,7,W,3,L
@DEBUGON
@SATCONFIG,A,98,11966,27500,34,0x0800,H,H,3
@SATCONFIG,A,98,11823,27500,34,0x0800,V,H,3
@SATCONFIG,A,98,00000,27500,34,0x0000,V,L,3
@SATCONFIG,A,98,00000,27500,34,0x0000,H,L,3
@SAVE,A
@DEBUGOFF
ZAP
11.966 GHz
27500
3/4
2048 (dec) = 0x0800
11.823 GHz
27500
3/4
2048(dec) = 0x0800
54-0161