Setting The Dish Type On A Directv Receiver - KVH Industries TracVision TV1 User Manual

Setting the Dish Type on a DIRECTV Receiver

To work with the TracVision system, the DIRECTV receiver(s) must be
set to the correct dish type for your particular configuration. To set the
dish type, follow these steps:
NOTE: A video tutorial of this procedure is available in
Tutorials playlist on YouTube
1. Press MENU on the receiver's remote control to access the
onscreen menu.
2. At the main menu, highlight Settings & Help. Then select
Settings.
3. Highlight and select Satellite.
4. Highlight and select Repeat Satellite Setup.
5. At the warning message, press the Dash (-) button on the
receiver's remote control.
6. Set the appropriate dish type for your receiver:
Receiver Type
U.S. SWM
U.S. Non-SWM and
Latin America
7. Highlight and select Continue to save your changes.
(Internet access required).
Dish Type Switch Type
3-LNB SWM
Round Multiswitch
TracVision TV1 User's Guide
Receiver Settings
KVH's TracVision
41