Deleting A Scalable Partition - IBM xSeries 445 Installation Manual

Deleting a scalable partition

Complete the following steps to delete the scalable partition:
1. Start the Configuration/Setup Utility on the primary server.
2. From the main menu, select Advanced Setup.
3. Select Scalable Partition Settings.
4. Select either Delete ALL Scalable Partition or Delete ONLY Local Scalable
5. Exit the Configuration/Setup Utility program.
6. Turn off the servers.
7. If necessary, remove the SMP Expansion cables and reconnect them according
8. Restart the servers.
Partition.
Note: Do not select Write Scalable Partition Settings when you delete the
scalable partition.
to your new configuration. See "Connecting the cables" on page 34 for
instructions.
Chapter 4. Configuring your server
65