Table of Contents
Advertisement
Figure 37. Routing cables through the cable management arm
38
xSeries 445 Type 8870: Installation Guide
a. Connect one end of a 2.5 m (8.2 ft) SMP Expansion cable to port 1 of SMP
Expansion Module 0 on the primary server; then, route the cable through the
cable-management arm.
b. Connect one end of a 2.5 m (8.2 ft) SMP Expansion cable to port 2 of SMP
Expansion Module 0 on the primary server; then, route the cable beside the
first cable in the cable-management arm.
Cable-management arm
Long SMP expansion cable
Advertisement
Table of Contents
