Table of Contents
Advertisement
Remote Supervisor Adapter II-EXA connectors and LEDs: The connectors and
LEDs on the back of the server are used for system-management information and
control.
External power
connector
Figure 56. Remote Supervisor Adapter II-EXA connectors
v External power connector: You can connect an optional ac power adapter to
v Heartbeat LED: This amber LED flashes continuously to indicate that there is
v RSA II-EXA breakout port: Connect the RSA II-EXA breakout cable to this port
v Ethernet activity LED: This green LED is lit when there is activity on the
v Ethernet link LED: This green LED is lit when the Ethernet link is active.
v 10/100 Ethernet port: Connect Ethernet signal cables to this port.
v Video port: Connect a monitor or console switch to this port.
v Power LED: This green LED comes on and stays lit when you plug in your
Remote Supervisor Adapter connectors and LEDs: The connectors and LEDs
on the back of the server are used for system-management information and control.
External power
connector
Figure 57. Remote Supervisor Adapter connectors
v External power connector: You can connect an optional ac power adapter to
54
xSeries 445 Type 8870: Installation Guide
Heartbeat LED
(amber)
Power LED
(green)
this connector.
activity on the Remote Supervisor Adapter II-EXA.
to provide two ASM interconnect ports, one USB port, and one Management port.
Ethernet LAN.
Important: The integrated video controller is disabled for models with a Remote
Supervisor Adapter II-EXA installed.
server.
Error LED
ASM interconnect
(amber)
port
Power LED
(green)
this connector.
Ethernet activity LED
(green)
RSA II - EXA
breakout port
Video port
10/100
Ethernet port
Ethernet activity LED
(green)
Management port
Ethernet link LED
(green)
Ethernet link LED
(green)
10/100
Ethernet port
Advertisement
Table of Contents
