Table of Contents
Advertisement
3. Using an RXE Expansion cable, connect one end of the cable to RXE
Expansion Port A on the RXE-100 enclosure.
First server RXE Expansion Port B
xSeries 445
B
1
1
2
3
0
xSeries 445
B
1
1
2
3
0
Second server RXE Expansion Port B
Figure 48. RXE Expansion Port cabling of two stand-alone xSeries 445 servers to a single
RXE-100 enclosure
4. Connect the opposite end of the cable to RXE Expansion Port A or B on the
first server.
Note: If the server has one SMP Expansion Module installed, you must
connect the RXE Expansion cable to RXE Expansion Port A on the
server. If the server has two SMP Expansion Modules installed, connect
the cable to RXE Expansion Port B.
5. Using an RXE Expansion cable, connect one end of the cable to RXE
Expansion Port B on the RXE-100 enclosure.
6. Connect the opposite end of the cable to RXE Expansion Port A or B on the
second server.
Note: When two SMP Expansion Modules are installed, both of the RXE
Expansion ports are active.
A
First server RXE Expansion Port A
RXE Expansion Port B
A
Second server RXE Expansion Port A
RXE Expansion Port A
Chapter 2. Installing options
45
Advertisement
Table of Contents
