Table of Contents
Advertisement
Connect to
SCSI backplane
Figure 25. Preinstalled SCSI cable for the ServeRAID adapter
Figure 26. Connecting the preinstalled SCSI cable
10. Close the server cover; then, go to "Completing the installation" on page 33.
30
xSeries 445 Type 8870: Installation Guide
Preinstalled
SCSI cable
6. Locate the preinstalled SCSI cable; then, attach the connector on the cable to
the ServeRAID adapter.
7. Locate the connector on the opposite end of the SCSI cable and connect it to
the SCSI backplane connector.
Front of server
SCSI backplane
connector
8. Reinstall fans 3 and 4.
9. If you have other options to install or remove, do so now.
Connect to
ServeRAID adapter
Advertisement
Table of Contents
