Unit" Column Of The Parameter Table; Status" Column Of The Parameter Table - Siemens SIMATIC PCS 7 Operating Manual

Shortcut menu
Right-click inside the parameter table to open one of the following fields:
● An information box is shown for static fields if the cursor is located over a parameter in the
● Selection of values from drop-down lists
● Shortcut menu for input boxes
Menu command
Minimum value ...
Maximum value ... Displays the maximum permitted value of the parameter.
Default value ...
) Click the value to transfer it to the parameter table.
*
) There can be several minimum, maximum and default values.
**
6.3.6.3

"Unit" column of the parameter table

The "Unit" column displays the engineering unit of the numerical value present in the "Value"
(Page 62) column.
6.3.6.4

"Status" column of the parameter table

The "Status" column displays the status of the parameter whose name is in the "Name"
(Page 62) column.
The table below shows the icons that can be displayed here:
Icon
- empty -
Help for SIMATIC PDM (V8.2)
Operating Manual, 02/2014, A5E33203676-AA
"Parameter" column.
Information is displayed to explain the meaning of the field or to explain the associated
entry in the "Value" column.
The drop-down lists open when you select a corresponding value with the cursor and click
on it.
Select the correct setting for your plant- and device-specific conditions.
Explanations/operating instructions
Displays the minimum permitted value of the parameter.
Displays the default value of the parameter.
Meaning
Value (Page 62) corresponds to the offline data storage
system.
Initialization running or status "OK".
Value was never changed.
The parameter has been changed by means of operator
input, import, or internal methods.
Value was changed by user.
The parameter could not be converted.
Value could not be converted following a change in the
unit.
6.3 Views in SIMATIC PDM
) )
* **
) )
* **
) )
* **
Action that can trigger the
status
Save
Open new PDM object
● Edit
● Dialogs
Edit
Views
63