Menus and dialog boxes in SIMATIC PDM
8.3 "Device" menu
Table 8-2
Field
"Redundancy activated"
check box
Corresponding slave
* Entry can be changed.
See also
Connecting field devices to a redundant bus system (Page 103)
"Select object" dialog box (Page 104)
8.3.5.5
"Document Manager" tab
Use this tab to assign documents to a PDM object.
Actions on the "Document Manager" tab
Action
File
Title
Test whether a document can be
displayed
Remove a document from the list.
Open documents
To open the documents, select the SIMATIC PDM menu command Help > Document
Manager. Select the required document from the submenu.
8.3.6
Calibration log
8.3.6.1
Calibration log...
Purpose
176
"Redundancy" area
Explanations/operating instructions
There is a redundant partner device for this device.
The redundant partner device can be found via this field.
To execute
1. Click the "..." button.
2. Navigate to the document required.
3. Click "Open".
Enter a name for the document.
Select the menu command Open.
Select the menu command Reset.
The storage path and file name of the selected file are
displayed in the "File" box.
Operating Manual, 02/2014, A5E33203676-AA
Help for SIMATIC PDM (V8.2)