Siemens SIMATIC PCS 7 Operating Manual page 179

"Log settings" dialog box
● "Heading calibration log" text box.
You change the heading for the calibration log in this text box.
● "Log content" area
You configure the visibility of information in the calibration log in this area.
Name of text box
Test environment
Identification data
Diagnostics
Settings for
measuring range
Available Channels
Attachments
Comments
Help menu
Help
Opens the help for SIMATIC PDM.
You can navigate to different help topics from the Table of Contents. The "Index" and "Find"
functions enable you to display information on specific terms.
About...
Opens the information about the version and the copyright details of SIMATIC PDM.
Tab
"Test environment" tab
Purpose
This tab displays information about the current device. You can change the names in the "Plant"
and "Tester" text boxes. Without these names, it is not possible to save and print logs.
Help for SIMATIC PDM (V8.2)
Operating Manual, 02/2014, A5E33203676-AA
Setting
You can change the heading for the
"Test environment" area in this text
box.
You can change the heading for the
"Identification data" area in this text
box.
You can change the heading for the
"Diagnostics" area in this text box.
You can change the heading for the
"Settings for measuring range" area
in this text box.
You can set the number of device
channels between one and eight in
this text box.
You can change the heading for the
"Attachments" area in this text box.
You can change the heading for the
"Comments" area in this text box.
Menus and dialog boxes in SIMATIC PDM
Visibility
Always visible
Always visible
If the "Visible" option is selected, this
area is visible in the log.
Always visible
-
If the "Visible" option is selected, this
area is visible in the log.
If the "Visible" option is selected, this
area is visible in the log.
8.3 "Device" menu
179