Siemens SIMATIC PCS 7 Operating Manual page 111

"Inputs and interconnections" area
● "Input" column
● "Internal interconnection" column
"Outputs" area
● "Output" column
Buttons
Button
Add
interconnection
Delete
interconnection
Close
Save
Download
Icons
Help for SIMATIC PDM (V8.2)
Operating Manual, 02/2014, A5E33203676-AA
This column shows the FF devices and the available inputs in the network view of the FF
segment. Inputs are the target of an interconnection.
This column displays a list of interconnections that were configured for the FF segment.
Layout: Output of the FF device > Function Block > Signal
This column shows the FF devices in the network view of the FF segment and the available
outputs. Outputs are the source of an interconnection.
Function
Click this button to add an interconnection to the column "Interconnections".
Click this button to delete an interconnection.
Click this button to close the dialog box.
A message informs you if changes were not saved.
Click this button to save configured interconnections in the SIMATIC project.
Click this button to open the CiF interconnection.
NOTICE!
Use this button only if no other changes have been made to the FF segment since
the last download of the device.
Icon Displayed object
FF segment
FF Link
FF device
Block within an FF device
Inputs and outputs
Analog input
Analog input
Digital input
Digital input
Analog output
Functions
7.3 Device management
Status
Not interconnected
Interconnected
Not interconnected
Interconnected
Not interconnected
111