Save Device List; Print Device List - Siemens SIMATIC PCS 7 Operating Manual

The status column (Page 35) indicates whether or not the corresponding device description is
integrated on the computer.
If you select a STEP 7 multiproject, all projects are always displayed, even when only a
subproject is selected in the dialog box.
Shortcut menu
If you select objects in the list of integrated device descriptions, you will find the following object-
dependent shortcut menu commands:
● Messages (Page 52)
● Remove integrated device description(s) (Page 44)
See also
Complete device information (Page 49)
5.5.1.5

Save device list

Saving the device list
Specify the storage location and file name for the file in which you want the device list to be
saved.
5.5.1.6

Print device list

You can print the device list that is currently being displayed.
Setting the printer options
Note
● The printer options depend on your computer's operating system and on the printer being
● The file is sent to the default printer.
● If the printout has more than one page, two periods are printed after the page number in
Help for SIMATIC PDM (V8.2)
Operating Manual, 02/2014, A5E33203676-AA
You use this menu command to open the message log.
You use this menu command to delete selected objects from the list of integrated device
descriptions.
used.
the bottom right corner of the page. The last page does not have these periods, indicating
no more pages are to follow.
Integrating devices into SIMATIC PDM
5.5 Menus and dialog boxes
47