Process Devices Network View; Options" Menu - Siemens SIMATIC PCS 7 Operating Manual

Menus and dialog boxes for SIMATIC PDM in the SIMATIC Manager

9.4 "Options" menu

9.3.2

Process devices network view

In SIMATIC Manager, you call the process devices network view using the menu command
View > Process devices network view.
The process devices network view displays the devices in groups according to the network
topology. Devices that can be reached via several networks are displayed multiple times. You
can configure networks and process devices in this view.
9.4 "Options" menu
You will find the following views in SIMATIC Manager after the installation of SIMATIC PDM:
● Process device plant view
● Process device network view
Project settings
The project settings are made in the SIMATIC Manager. These settings apply to the SIMATIC
project and SIMATIC PDM.
● Language for the menus and dialog boxes
● Default project view
● Display
● Details in the columns
You make the project settings in SIMATIC Manager using the following menu command:
Options > Settings...
Settings
Language selection
Default project view
Details in the columns
"Columns" tab
On the "Columns" tab, you can select the columns that you want to be displayed in a PDM
view.
208
Tab
"Language" tab
"View" tab
"Columns" tab
Meaning
Language displayed in the menus and dialog
boxes in the SIMATIC Manager and SIMATIC
PDM
Start view for the SIMATIC Manager;
available views for SIMATIC PDM:
● Process device plant view
● Process device network view
Views and object types in the parameter table
Help for SIMATIC PDM (V8.2)
Operating Manual, 02/2014, A5E33203676-AA