Siemens SIMATIC PCS 7 Operating Manual page 131

Available nodes
Address
Manufacturer
Device type
Device ID
Hardware revision
Software revision
Installation date
Ident number
Device family
Profile revision
GSD file
Long address
Device status
Update diagnostics
The "Update diagnostics" function is used to once again determine the diagnostic information
for the object selected in the scan table.
This function is available only when the appropriate licenses (Page 132) are installed.
Assign address and TAG
If you want to assign a new address or object name to a device, select the "Assign address
and TAG" function for the selected object.
The "Assign address and TAG..." (Page 134) dialog opens.
Here, you can enter a new object name and a new address and then transfer them directly to
the connected device using the "Transfer" button.
Reassign (select device type)
If there has not been an automatic EDD assignment of objects, you have the option of making
the assignment manually.
Manual assignment is appropriate for objects for which you want to start diagnostics or export
the results.
Manual EDD assignment uses the "Reassign (select Device Type)" function.
This function is available only when the appropriate licenses (Page 132) are installed.
Help for SIMATIC PDM (V8.2)
Operating Manual, 02/2014, A5E33203676-AA
Column header PROFIBUS
+
+
+
+
+
+
+
+
+
+
+
+
-
+
FF HART modem
+
+
+
+
+
+
+
+
-
-
-
-
-
+
Functions
7.7 LifeList
+
+
+
+
+
+
+
+
-
-
+
-
+
+
131