Siemens SIMATIC PCS 7 Operating Manual page 89

● In SIMATIC Manager, select the menu command Options > SIMATIC PDM > HART server.
● In the Windows taskbar, select the menu command Start > Programs > HART server >
Starting the HART server application for the first time
To configure communication between SIMATIC PDM and the HART server, proceed as follows:
1. Select the HART server project. Select the menu command File > Preferences.
2. In the "New Configuration Will Use" section, select the check box according to your settings
3. Apply this setting also to the existing project, if required. After it has been applied to an
Note
SIMATIC PDM default settings
The default settings for HART communication in SIMATIC PDM correspond to the "8 char
(HART 5), 32 char (HART 6 +)" check box.
Help for SIMATIC PDM (V8.2)
Operating Manual, 02/2014, A5E33203676-AA
HART server (path of the HART server created by SIMATIC PDM setup).
Note
Network address of the HART multiplexer
Enter the network address of the HART multiplexer in the HART server application when
you create an I/O system in the HART network.
The "HART Server Preferences" dialog box opens.
in SIMATIC PDM.
existing project, the devices must be read in again with "Learn".
Functions
7.3 Device management
89