Upload To Pg/Pc - Siemens SIMATIC PCS 7 Operating Manual

Menus and dialog boxes in SIMATIC PDM
8.3 "Device" menu
If a device is opened twice, for example, by opening the higher-level network and by opening
it directly, this menu command is grayed out in the second window and can only be accessed
in the window that was opened first.
Note
Before uploading to PG/PC from remote I/Os, you need to add a corresponding number of
empty modules below the head module in the configuration.
Errors and messages
During the loading, all errors and messages are shown immediately. Any errors occurring in
a device do not cause the entire action to be aborted; they only apply to the device that is
currently being processed. Errors and other messages are saved and can be displayed at a
later time.
Suppressing message dialogs
You can suppress message dialogs during the loading. Select the "Execute 'Load' without info
dialogs" check box. You can find additional information using the Options > SIMATIC PDM >
Settings > The "Load" tab (Page 213) menu command.
Additional information
You can find information on loading FF devices in the
commissioning manual
See also
"Upload to PG/PC - <...>" dialog box (Page 166)
8.3.2.1 "Upload to PG/PC - <...>" dialog box
In this dialog box, you enter the desired settings for uploading the data from the devices to the
configuration data.
"Select" area
If the object selected prior to loading contains subordinate objects, you can load the
configuration to all subordinate objects. Use the option buttons in the "Select" area to make
your selection.
● Object
● Object with all subordinate objects
● Object with all subordinate objects and networks
166
PCS 7 FOUNDATION Fieldbus
Help for SIMATIC PDM (V8.2)
Operating Manual, 02/2014, A5E33203676-AA