Reinstalling / Removing Simatic Pdm - Siemens SIMATIC PCS 7 Operating Manual

3.4

Reinstalling / Removing SIMATIC PDM

Note
Observe the information on dealing with license keys, which can be found in:
● File
● Help for the Automation License Manager
Reinstalling
Reinstallation over the top of an existing SIMATIC PDM version is not possible. Remove
SIMATIC PDM prior to installing the new version.
Note
Device descriptions
Following a new installation, the required device description must be integrated again.
The device descriptions included with SIMATIC PDM are available on the "Device Library"
DVD.
You know the storage locations of additionally used device descriptions.
You can find information about integrating the device descriptions in the section "Integrating
devices into SIMATIC PDM (Page 31)".
Removing
To remove SIMATIC PDM, use the Windows system function for removing programs.
Help for SIMATIC PDM (V8.2)
Operating Manual, 02/2014, A5E33203676-AA
pdmbase-readme
3.4 Reinstalling / Removing SIMATIC PDM
Installation
27