Setting Required For The Programming Tool - Mitsubishi L02CPU User Manual

3.2

Setting Required for the Programming Tool

Configure the settings in the "Transfer Setup" window.
Connection Destination window
1.
Select "Ethernet Board" for "PC side I/F".
In the "PC side IF Ethernet Board Setting" window, select a "TCP" or "UDP" protocol. Select the same
protocol as the one set in the "Ethernet Conf." or "Open Setting" window. (
2.
3.
CHAPTER 3 CONNECTION WITH PROGRAMMING TOOL AND GOT
[Connection1]
1.
Page 23, Section 3.1)
25
3