Mitsubishi L02CPU User Manual page 59

Item
Protocol Select "TCP" or "UDP".
Open System Select "Predefined Protocol".
TCP Connection
When "Protocol" is "TCP", select the connection method. (
Set the port number of the CPU module.
Host Station
Setting range: 0001
Set the IP address of the external device.
Destination IP Address
Setting range: 0.0.0.1 to 223.255.255.254
Set the port number of the external device.
• Setting range: 0001
Destination Port No.
• Setting range: 0001
Set the start device number for storing the protocol execution status, received data verification
result, number of protocol executions, and protocol cancellation status. (
Start Device to Store
6.2 (1))
Predefined Protocol
The area of 19 words starting from the specified device is used.
Available devices: D, W, R, ZR
*1 Do not specify 1388 to 1391
H
2)
CHAPTER 6 DATA COMMUNICATIONS USING THE PREDEFINED PROTOCOL
7.
Set the connection for connecting the predefined
protocol.
to 1387 , 1392 to FFFE
H H H
to FFFE (1 to 65534) (for TCP)
H H
to FFFE /FFFF
H H
(5000 to 5009) because these ports are used by the system. (
H
[PLC Parameter] [Built-in Ethernet Port
Setting] [Open Setting]
Description
Page 66, Section 7.1)
(1 to 4999, 5010 to 65534)
H
(1 to 65534/65535) (for UDP)
H
6
*1
Page 59, Section
Page 221, Appendix
57