Mitsubishi L02CPU User Manual page 128

*1 The SP.FWRITE or SP.FREAD instruction in the program will write or read the file.
For details, refer to the following.
MELSEC-Q/L Programming Manual (Common Instruction)
*2 Files can be written to the program memory only when the CPU module is in the STOP state.
*3 Write destination is the program cache memory.
The user should back up files using the "pm-write" command as required. (
*4 The following number of files can be stored using FTP.
[Maximum number of files storable on the drive - 1]
*5 File names are SRCINF1M.C32, SRCINF2M.C32 for Simple projects (with labels), and SRCINF1I.C32, SRCINF2I.C32
for Structured projects.
*6 The file name depends on the connection type of the data backup/restoration. (
Manual)
When the online change settings is disabled in the "Built-in Ethernet Port Setting" tab of PLC parameter, deleting a file in
RUN state will cause an error.
126
Page 127, Section 9.4.1)
iQ Sensor Solution Reference