Mitsubishi L02CPU User Manual page 171

If the L/Q/QnA series modules are used for the simple PLC communication, F000
the port No. of the host station. Therefore, when using the simple PLC communication function, do not set F000
to Host Station Port No. for the establishing a connection instruction (SP.SOCOPEN) of the socket communication function.
If set, the instruction may not be completed properly.
(b) Module Type list
The following table shows the communication devices and specifications applicable to each module.
Module type
MELSEC-Q/L (Built-in Ethernet
Function)
MELSEC-Q/L (Ethernet Module)
MELSEC-QnA (Ethernet Module)
MELSEC-A (Ethernet
Module)/MELSEC-FX3 (Ethernet
*1
Block/Adapter)
*1 MELSEC-FX3 (Ethernet Block/Adapter) is compatible with only the CPU module with a serial number (first five digits) of
"16042" or later.
CHAPTER 12 SIMPLE PLC COMMUNICATION FUNCTION
Device for communications
Built-in Ethernet port QCPU
Built-in Ethernet port LCPU
Basic model QCPU + Ethernet module
High Performance model QCPU + Ethernet module
Process CPU + Ethernet module
Universal model QCPU + Ethernet module
Built-in Ethernet port LCPU + Ethernet module
QnACPU + Ethernet module
ACPU + Ethernet module
High Performance model QCPU (A mode) + Ethernet module
FX3U(C)CPU + Ethernet block
FX3CPU + Ethernet adapter
to FFFE is automatically selected for
H H
H
Communication
specification
MELSOFT
connection
MC protocol A-
compatible 1E frame
(binary code
communication)
to FFFE
H
12
169