Mitsubishi L02CPU User Manual page 216

(3) Function
• This instruction registers/deletes the e-mail address specified in
number specified in
parameter is not applicable.)
• The execution type specified in
• To either register or delete an e-mail address with the SP.MLOPEADR instruction, the e-mail address needs
to be specified in
• The data from the device number specified in
as an e-mail address.
• The characters that can be used for the e-mail address are "20
excluded.) If any other character is used, the instruction is completed with an error.
• The e-mail address table allows multiple e-mail addresses to be registered in one setting number. If another
e-mail address is registered in the setting number in which an e-mail address is already registered, a one-
byte comma "," is automatically inserted as a delimiter between the e-mail addresses. (Up to 500 one-byte
characters can be registered.)
• If delimiter "," exists in the string specified in
mail addresses cannot be registered or deleted simultaneously.)
Note that if an already registered e-mail address is registered during e-mail address registration, two or more identical e-mail
addresses come to exist. (Same e-mails by the number of registered e-mail addresses are delivered.)
• If the number of characters that can be registered is exceeded when registering the e-mail address, the
instruction is completed with an error.
• If the specified e-mail address is not registered when deleting an e-mail address, the instruction is completed
with an error.
• By performing the backup setting in
after the power is turned off. SM1661 is on during backup. The e-mail addresses are backed up to flash
ROM and restored automatically during initialization.
Do not perform resetting or turn off the power while SM1661 (e-mail address backup processing flag) is on (during backup).
Doing so may corrupt the file or prevent the backup from being reflected. If the backup file is corrupted, it is deleted during
restoration.
• The result of the SP.MLOPEADR instruction can be checked with the completion device,
• Completion device
SP.MLOPEADR instruction completes, and turns off during the next END processing.
• Completion device
instruction.
State
When
completed
normally
When
completed with
an error
214
of the e-mail address table. (The destination e-mail address setting number of the PC
S2
+0 specifies whether to register or delete an e-mail address.
S1
.
S3
S1
+0: This device turns on during END processing of the scan where the
D
+1: This device turns on or off according to the result of the SP.MLOPEADR
D
Remains off.
Turns on during END processing of the scan where the SP.MLOPEADR instruction completes, and turns off during the next
END processing.
When completed with an error, an error code is stored in the completion status of
S1
to the device number in which "00
S3
H
, the instruction is completed with an error. (Two or more e-
S3
+0, the e-mail addresses in the e-mail address table can be held even
Description
in the destination e-mail address setting
S3
" is stored is registered
H
" to "7E ". (However, "2C
H H
+1.
S1
" (comma) is
+0 and +1.
D D