Mitsubishi L02CPU User Manual page 136

(2) CPU module dedicated subcommands
The following table lists the CPU module dedicated subcommands that are added to the "quote" command and
sent.
change
password-
unlock
*1 Use this command only when the FTP communication port is specified as a remote password check target.
134
Function Displays or changes the attribute of a file stored in the CPU module.
Specification When displaying the file attribute:
format 1 quote change" file path name"
Either of the following is displayed as the execution result when the processing completes
successfully.
• When the specified file is read-only: -----R
• When the specified file is writable and readable: -----W
Specification
When changing the file attribute:
format 2
quote change "file path name" "attribute"
Use either of the following to specify the attribute.
• To change it to a read-only file: r
• To change it to a writable and readable file: w
Example 1 When displaying the attribute of a file stored in the standard RAM:
quote change 3:\MAINSEQ1.QDR
Example 2 When changing the attribute of a file stored in the standard RAM:
quote change 3:\MAINSEQ1.QDR r
Function
Specifies the remote password set in the CPU module and unlocks the password.
Specification
quote password-unlock [remote password]
format
• Remote password: Specify the remote password set in parameter of the CPU module.
The following is displayed as the execution result when the processing completes
successfully.
200 Command 0key
The following is displayed if the remote passwords do not match.
556 Password Error
The following is displayed if another command is requested before the remote password is
unlocked.
555 Password Locked
Example When specifying a remote password (1234):
quote password-unlock 1234
Note
• If the FTP communication port is specified as a remote password check target when
logging in, the password is locked.
• By executing this command before various FTP operations, the password is unlocked,
allowing file operations of the CPU module.
• If the FTP communication port is not specified as a remote password check target,
Unlock processing will be completed if the remote password is unlocked.
*1