Mitsubishi L02CPU User Manual page 208

• When "E-mail address stored in CPU internal memory" is specified in the destination e-mail address
S1 S1
specification in
( +2) stored in CPU internal memory.
S1
• Specify the content (Subject + message body) of the send e-mail specified in
• The range of
• The Subject length specified in
an odd number, store 00
Subject is "abcde".
Ex.
• The result of the SP.MLSEND instruction can be checked with the completion device,
• Completion device
instruction completes, and turns off during the next END processing.
• Completion device
State
When
completed
normally
When
completed with
an error
• The SP.MLSEND instruction runtime operation is as follows.
SP.MLSEND instruction
Completion device
Completion device
CPU module
Mail server
• If a e-mail address setting number in which no e-mail address is registered is specified, the instruction is
completed with an error.
206
+0, e-mail is sent to the e-mail address registered in e-mail address send destination No.
S1
SP.MLSEND U0 S1 S2 D
E-mail address table
(e-mail address setting No.)
Destination No. (
is determined by +9 (send data length) and
S2 S1
+10 is in word units. Therefore, when the Subject string specified in
S1
(NULL) in upper 8 bits of the end device number.
H
...
b15 b8
62 (b)
S2
H
S2 +1 64 (d)
H
+2 00 (NULL)
S2
H
2nd character
+3
S2
in message body
+0: This device turns on during END processing of the scan where the SP.MLSEND
D
+1: This device turns on or off according to the result of the SP.MLSEND instruction.
D
Remains off.
Turns on during END processing of the scan where the SP.MLSEND instruction completes, and turns off during the next
END processing.
When completed with an error, an error code is stored in the completion status of
S1
Also, when bit 7 of +0 is on, clock data is stored in
S1
OFF
D
OFF
+1
D
OFF
Destination e-mail address
Message body
+2) = Destination e-mail address
S1
S1
...
b7 b0
61 (a)
H
63 (c) Subject data length
H
65 (e)
H
1st character
in message body
·
Description
+12 to +15.
S1 S1
ON
Instruction execution
E-mail
E-mail
Subject
in ASCII code.
S2
+10 (Subject length).
+0 and
D
+1.
S1
ON
ON
1 scan
is
S2
+1.
D