Troubleshooting By Error Log - Panasonic VL-VN1800 Installation Manual

7.1.4 Troubleshooting by Error Log

A. System Mode Switch
2.
Start the Web Maintenance Console.
3.
Log in using an Administrator level account.
4.
On the Home screen, click Maintenance → System Control → System Reset → System Reset.
5.
Follow the prompts.
Restarting the Control Box will start.
To reset the system at a preset time:
1. Confirm that the System Mode Switch is in the "NORMAL" position.
2. Start the Web Maintenance Console.
3. Log in using an Administrator level account.
4. On the Home screen, click Maintenance → System Control → System Reset → Timed Reset.
5. Set the Reset Mode and Reset Time for the system reset.
For details about the settings, refer to the PC Programming Manual.
6.
Click Apply or OK to set the system reset.
The Control Box will restart at the specified time.
PC Programming Manual References
5.2 System Control—System Reset
7.1.4 Troubleshooting by Error Log
When a major system error occurs in the Control Box, the STATUS indicator on the front of the cabinet turns
red, and the system logs the error information.
Error Log Display Format
Below is the display format of the error log. For information about how to view the error log using Web
Maintenance Console, refer to "7.2.1 Utility—Log—Error Log" in the PC Programming Manual.
62 Installation Manual
A