Main Function - ACME LED WAVE 100 User Manual

C. Replace the lens
You could replace the other lens if you want to, as following picture.
You should screw the lens roller to take it down as NO.1, and bring the lens out as No.2. Then you
could replace the lens that you want to.
Notes: the lens roller has two slots for the lens; you should pay more attention that the latest slot
is for the 29°lens, and the far slot is for 44°lens.

3.3 Main Function

To select any of the given functions, press the MENU button up to when the required selection as
shown on the display. Select the function by the ENTER button and the display will blink. Use the
DOWN/UP button to change the mode. Once the required mode has been selected, press the
ENTER button to setup, to go back to the functions without any change press the MENU button
again. Press and hold the MENU button for about one second or wait for one minute to exit the
menu mode.
The main functions are shown below:
6B