Dmx Controller; Dmx 512 Configuration - ACME LED WAVE 100 User Manual

3. Slow Sync. Strobe
LED OFF
Mode

4.3 DMX Controller

Use universal DMX controller to control the units, you have to set DMX address from 1 to 512
channel so that the units can receive DMX signal.
Press the MENU button up to when the
and the display will blink. Use DOWN and UP button to change the DMX512 address. Once the
address has been selected, press and keep ENTER button pressed up to when the display stops
blinking or storing automatically one minute later. To go back to the functions without any change
press the MENU button again. If you use please refer to the following diagram to address your
DMX512 channel for the first 4 units.
3 channels：

4.4 DMX 512 Configuration

3 Channel Mode:
CHANNEL
1
2
3
VALUE
000 ~ 255
000 ~ 009
010 ~ 120
121~ 134
135 ~ 245
246 ~ 255
000 ~ 010
010 ~ 021
022~ 032
033 ~ 043
044 ~ 054
055 ~ 065
LED blinking
is showing on the display. Pressing ENTER button
FUNCTIONS
DIMMER
0  100%
Diamond Wheel
CW Rotation: fast  slow
CCW Rotation: slow  fast
Color Wheel
Open
Open  Color 1
Color 1
Color 1  Color 2
Color 2
Color 2  Color 3
11B
Stop
Stop
Stop