D-Link DES-3550 Command Line Interface Reference Manual page 86

Example usage:
To display the switch history log:
DES-3550:4#show log index 5
Command: show log index 5
Index Time
----- -------------------
5 00000 days 00:01:09
4 00000 days 00:00:14
3 00000 days 00:00:06
2 00000 days 00:00:01
1 00000 days 00:06:31
DES-3550:4#
enable syslog
Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To the syslog function on the Switch:
DES-3550:4#enable syslog
Command: enable syslog
Success.
DES-3550:4#
DES-3550 Layer 2 Fast Ethernet Switch
Log Text
----------------------------------------------------
Successful login through Console (Username: Anonymous)
System started up
Port 1 link up, 100Mbps FULL duplex
Spanning Tree Protocol is disabled
Configuration saved to flash (Username: Anonymous)
Used to enable the system log to be sent to a remote host.
enable syslog
The enable syslog command enables the system log to be sent to a
remote host.
None.
Only administrator-level users can issue this command.
82