D-Link DES-3550 Command Line Interface Reference Manual page 169

enable igmp_snooping
Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To enable IGMP snooping on the Switch:
DES-3550:4#enable igmp_snooping
Command: enable igmp_snooping
Success.
DES-3550:4#
DES-3550 Layer 2 Fast Ethernet Switch
Used to enable IGMP snooping on the Switch.
enable igmp_snooping {forward_mcrouter_only}
This command allows you to enable IGMP snooping on the Switch. If
forward_mcrouter_only is specified, the Switch will only forward all
multicast traffic to the multicast router, only. Otherwise, the Switch
forwards all multicast traffic to any IP router.
forward_mcrouter_only − Specifies that the Switch should only
forward all multicast traffic to a multicast-enabled router. Otherwise,
the Switch will forward all multicast traffic to any IP router.
Only administrator-level users can issue this command.
165