D-Link DES-3550 Command Line Interface Reference Manual page 59

enable snmp traps
Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To enable SNMP trap support on the Switch:
DES-3550:4#enable snmp traps
Command: enable snmp traps
Success.
DES-3550:4#
enable snmp authenticate_traps
Purpose
Syntax
Description
Parameters
Restrictions
Example Usage:
To turn on SNMP authentication trap support:
DES-3550:4#enable snmp authenticate_traps
Command: enable snmp authenticate_traps
Success.
DES-3550:4#
DES-3550 Layer 2 Fast Ethernet Switch
Used to enable SNMP trap support.
enable snmp traps
The enable snmp traps command is used to enable SNMP trap support on the
Switch.
None.
Only administrator-level users can issue this command.
Used to enable SNMP authentication trap support.
enable snmp authenticate_traps
This command is used to enable SNMP authentication trap support on the Switch.
None.
Only administrator-level users can issue this command.
55