D-Link DES-3550 Command Line Interface Reference Manual page 76

NOTE: With autoconfig enabled, the Switch ipif settings now define the Switch as a
DHCP client. Use the show switch command to display the new IP settings status.
disable autoconfig
Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To stop the autoconfiguration function:
DES-3550:4#disable autoconfig
Command: disable autoconfig
Success.
DES-3550:4#
DES-3550 Layer 2 Fast Ethernet Switch
Use this to deactivate autoconfiguration from DHCP.
disable autoconfig
This instructs the Switch not to request autoconfiguration instruction from
the DHCP server. This does not change the IP settings of the Switch. The
ipif settings will continue as DHCP client until changed with the config ipif
command.
None.
None.
72