D-Link DES-3550 Command Line Interface Reference Manual page 179

show limited multicast address
Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To show the limited multicast address on ports 1-3:
DES-3550 Layer 2 Fast Ethernet Switch
Used to show per-port Limited IP multicast address range.
show limited multicast address {<portlist>}
The show limited multicast address command allows you to show
multicat address range by ports.
<portlist> A port or range of ports on which the limited multicast
address range to be shown has been assigned.
None.
DES-3550:4#show limited multicast address 1-3
Command: show limited multicast address 1-3
Port From To
---- -------------- --------------- -------- -------
1 224.1.1.1 224.1.1.2
2 224.1.1.1 224.1.1.2
3 224.1.1.1 224.1.1.2
DES-3550:4#
Access Status
permit enable
permit enable
permit enable
175