D-Link DES-3550 Command Line Interface Reference Manual page 196

config 802.1x capability ports
Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To configure 802.1x capability on ports 1-10:
DES-3550:4#config 802.1x capability ports 1 – 10 authenticator
Command: config 802.1x capability ports 1 – 10 authenticator
Success.
DES-3550:4#
DES-3550 Layer 2 Fast Ethernet Switch
Used to configure the 802.1x capability of a range of ports on the
Switch.
config 802.1x capability ports [<portlist> | all] [authenticator |
none]
The config 802.1x command has four capabilities that can be set for
each port. Authenticator, Supplicant, Authenticator and Supplicant,
and None.
<portlist> − Specifies a port or range of ports to be configured.
all − Specifies all of the ports on the Switch.
authenticator − A user must pass the authentication process to gain
access to the network.
none − The port is not controlled by the 802.1x functions.
Only administrator-level users can issue this command.
192