D-Link DES-3550 Command Line Interface Reference Manual page 282

show authen parameter
Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To view the authentication parameters currently set on the Switch:
DES-3550:4#show authen parameter
Command: show authen parameter
Response timeout : 60 seconds
User attempts
DES-3550:4#
DES-3550 Layer 2 Fast Ethernet Switch
Used to display the authentication parameters currently configured
on the Switch.
show authen parameter
This command will display the authentication parameters currently
configured on the Switch, including the response timeout and user
authentication attempts.
This command will display the following fields:
Response timeout – The configured time allotted for the Switch to
wait for a response of authentication from the user attempting to log
in from the command line interface or telnet interface.
User attempts: The maximum number of attempts the user may try
to become authenticated by the Switch, before being locked out.
None.
None.
: 5
278