D-Link DES-3550 Command Line Interface Reference Manual page 127

show traffic control
Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To display traffic control setting:
DES-3550:4#show traffic control
Command: show traffic control
Traffic Control
Module Group [ports]
------
1
1
1
1
1
Total Entries: 5
DES-3550:4#
DES-3550 Layer 2 Fast Ethernet Switch
Used to display current traffic control settings.
show traffic control {group_list <storm_grouplist>}
This command displays the current storm traffic control configuration
on the Switch.
group_list <storm_grouplist> − Used to specify a broadcast storm
control group. This is specified by entering the <storm_grouplist>.
None.
Threshold
------------- ---------
1 [ 1-8 ] 128
2 [ 9-18 ] 128
3 [ 17-24] 128
4 [ 25 ] 128
5 [ 26 ] 128
Broadcast Multicast
Storm Storm
--------- ---------
Disabled Disabled
Disabled Disabled
Disabled Disabled
Disabled Disabled
Disabled Disabled
123
Destination
Lookup Fail
--------
Disabled
Disabled
Disabled
Disabled
Disabled