D-Link DES-3550 Command Line Interface Reference Manual page 55

show snmp host
Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To display the currently configured SNMP hosts on the Switch:
DES-3550:4#show snmp host
Command: show snmp host
SNMP Host Table
Host IP Address
---------------
10.48.76.23
10.48.74.100
Total Entries: 2
DES-3550:4#
DES-3550 Layer 2 Fast Ethernet Switch
Used to display the recipient of SNMP traps generated by the
Switch's SNMP agent.
show snmp host {<ipaddr>}
The show snmp host command is used to display the IP addresses
and configuration information of remote SNMP managers that are
designated as recipients of SNMP traps that are generated by the
Switch's SNMP agent.
<ipaddr> − The IP address of a remote SNMP manager that will
receive SNMP traps generated by the Switch's SNMP agent.
None.
SNMP Version
---------------------
V2c
V3 authpriv
Community Name/SNMPv3
User Name
------------------------------
private
public
51